Description:

Features:

• Commercial-grade 22 hp Kawasaki® FX691V (726cc) engine
• A fully fabricated 48-inch 10-gauge steel commercial deck shell with top bottom and side reinforcements plus standard 24" tires give you more ground clearance to easily hop on curbs.
• A large, fully adjustable suspension platform allows you to adjust tension and glide comfortably through tough terrains.
• High-performance commercial Hydro-Gear® PK 12cc pumps & Parker® TL 240cc wheel motors deliver quick response to the drive wheels and smooth control for cutting speeds up to 10 mph.
• 3-year limited commercial warranty (no hour limitations) and 5-year/1,750-hour limited deck assembly warranty.

Specifications:

• Engine Brand
• Kawasaki®
• Engine Model
• FX Series
• Engine Model Number
• 691V
• Engine Displacement
• 726cc
• Engine Output
• 22HP
• Starter Type
• Electronic with quick reset
• Fuel Tank Capacity
• 7.5 gal. US (28.4 L)
• Cylinders
• Twin
• Engine Start
• Ignition Key
• Engine Oil Capacity
• 2.0 qt. US (1.89 L)
• Lubrication
• Fully pressurized
• Charging System
• 15 amp regulated
• Fuel Gauge
• No
• Choke
• Separate Choke
• Air Filter
• High Density
• Oil Filter
• Yes
• Fuel Delivery
• Carburetor

Drive System

• Transmission
• 12cc Hydro-Gear® pumps / 240cc Parker® wheel motors
• Forward Speed
• 10 mph / 16 km/h
• Reverse Speed
• 5 mph / 8 km/h

Cutting Deck

• Deck Cutting Width
• 48 in
• Deck Engagement (PTO)
• Electric
• Deck Construction
• 10 ga shell w/ 7 ga top & bottom reinforcement
• Spindle Construction
• HD 8" aluminum housing, 35mm double-row sealed ball bearings, 1-3/8" through-shaft and maintenance-free design
• Blade(s)
• 3 17" long high-lift Marbain® blades, 1-1/2" of blade overlap
• Deck Lift
• Hand lever adjusting spring lift, pin selector for height
• Cutting Height Range
• 1.5”- 4.5”
• Anti-Scalping
• 2 front deck gauge wheels

Chassis

• Frame
• 2" x 3" full-length tube frame
• Front Axle
• 2" x 3" tube construction
• Front Caster Mount
• 3/8" thick steel
• Suspension
• Hand lever adjust, 3-position spring suspension foot platform

Controls

• Cruise Control
• NA
• Brakes
• Hand lever control / external band
• Steering Control
• Lap Bar Steering Wheel Control

Wheels

• Rear Tires
• 24"x9.5"-12"
• Front Tires
• 13x5-6" Reliance Run Flat carlisle

Dimensions

• Dimensions L/W/H
• 69" / 62" / 50"
• Weight (approx.)
• 1015 lbs

Description:

Features:

• 27 HP Kawasaki FX850v (852cc) engine and 12cc Parker HTJ transmission
• 60” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
• 3-year limited commercial warranty (no hour limitations) and 5 year / 1,750 hour limited deck construction warranty

Description:

Features:

• 35 HP Kawasaki FX1000v (999cc) engine and 16cc Parker HTG transmission
• 72” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
• 3-year limited commercial warranty (no hour limitations) and 5 year / 1,750 hour limited deck construction warranty

Description:

The Pro-Z 972 SDL Zero Turn is simply the strongest and best commercial grade mower you can buy.

With dual rear wheels, weighted front wheels and four wheel steering the Pro-Z 972 SDL will safely mow on slopes up to 25 degrees.

Lock-in or out self-leveling air-ride seat with 30 degrees of side-to-side swivel ensures you are sitting upright and comfortable on even the steepest of slopes.

A huge 72 Inch fabricated steel cutting deck and strong 35HP Kawasaki V-Twin adds unmatched speed and productivity to the package.

The Pro-Z 972 SDL is the only choice for professional contractors who demand strength, reliability, productivity and extreme hillside mowing capability.

Features

 A powerful slope mower with 35 HP Kawasaki FX1000v (999cc) engine and 16cc Parker HTG transmission

 72” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements

 Lock-in or out self-leveling air-ride seat with 30 degrees of side-to-side swivel/15 degrees of travel left or right.

 Dual rear wheels and weighted front rims give this steep slope mower traction on up to a 46% grade. 12-volt outlet kit and electronic power deck lift included

 3-year limited commercial warranty (no hour limitations) and 5 year / 1,750 hour limited deck construction warranty

Specifications For Model # PRO Z 972 SDL

Engine

• Engine Brand Kawasaki®
• Engine Model FX Series
• Engine Model Number 1000V
• Engine Displacement 999cc
• Engine Output 35HP
• Starter Type Electronic
• Fuel Tank Capacity Dual 7.45 gal. US (28.2 L)
• Cylinders Twin
• Engine Start Ignition Key
• Engine Oil Capacity 2.0 qt. US (1.89 L)
• Lubrication Fully pressurized
• Charging System 15 amp regulated
• Fuel Gauge Electronic
• Choke Separate Choke
• Air Filter High Density
• Oil Filter Yes
• Fuel Delivery Carburetor

Battery

• Battery 310CCA AGM battery; Relay/Fuse terminal block; 30 AMP voltage regulator

Drive System

• Transmission Parker® heavy duty HTG 16cc pump / 310cc wheel motor with oversized wheel bearings
• Forward Speed 14 mph / 22.5 km/h
• Reverse Speed 6 mph / 9.5 km/h

Cutting Deck

• Deck Cutting Width 72 in
• Deck Material triple-7-gauge fabricated steel
• Deck Engagement (PTO) Electronic with quick reset
• Deck Construction Floating, fabricated 7 ga (0.187") steel and adjustable rear striping rollers
• Spindle Construction Maintenance-free cast aluminum housing
• Blade(s) 3 high-lift Marbain® blades / 18,500 fpm (approx.)
• Deck Lift Electro-hydraulic assist quick-lift design
• Cutting Height Range 1” to 5” in 1/4” increments
• Anti-Scalping 4 front deck gauge wheels
• Deck Positions 16

Warranty

• Deck Shell Warranty 5 year / 1,750 hour limited deck construction warranty
• Commercial Warranty 3 year / no hour limit commercial warranty

Chassis

• Frame Fully welded, 3/8" x 5" laser-cut steel
• Front Axle 2" x 3" solid with Isolation dampening system, 1/2" thick steel
• ROPS 2" x 2" foldable 3-position with low profile
• Bumper 5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
• Rear Tow Hitch Bolt-On hitch std.

Controls

• Cruise Control NA
• Brakes Hand-operated lever with integrated hydro pump release lever
• Steering Control Quick-adjust steering column w/ power steering
• Operator Control Low-profile throttle lever

Comfort

• Seat Type High-back air-ride suspension, EVC cushion, seat belt, angle-back adjust, lumbar support, padded armrests, isolation dampening system mounted base (lateral suspension)
• Seat Suspension side-to-side swivel/15 degrees of travel left or right
• Seat Control Swivel User-controlled lock/unlock swivel seat for operator leveling up to 30-degrees total/15-degrees left or right travel

Wheels

• Rear Tires 25"x9"-12" HD Traction Tread
• Front Tires 16"x6.5"-8" Kenda K505
• Tire Tread Heavy-Duty traction tread

Dimensions

• Dimensions L/W/H 88" / 74" / 85"
• Weight (approx.) 1,885 lbs

Additional Specifications

• Hour Meter Crew Boss
• Headlight(s) 6 LED Lights for 360 degrees of lighted visibility; Amber Beacon with three position adjustments
• Cup Holder Intergrated into Side Pod
• Model Number 53TILMUY050

Specifications

• Engine Starter Type Electric

Description:

The Cub Cadet Pro Z 560S KW features a 60-inch, fabricated deck with a Kawasaki FX Series V-Twin engine. This model features a pedal-assisted lift for the cutting deck, allowing the operator to quickly and easily adjust the deck height between sixteen different heights. Dual 7.5 gallon fuel tanks provide all-day mowing capabilities without the need to refuel often.

Features:

• 27HP/852cc Kawasaki FX850V Series V-Twin Engine
• 60-inch, 3-blade fabricated deck
• 12cc Parker HTJ series pumps and 260cc Parker motor
• Dual 7.5 gallon fuel capacity
• Ground speed: 10 mph forward/5 mph reverse
• Front wheels: 15 x 6 in - 6 in
• Rear wheels: 24 x 12 in - 12 in
• 3-year limited warranty
• Model: 53TIHJUV050

Specifications:

Warranty

• Commercial Warranty: 3 years / no hour limit

Steering

• Type: High Performance Steering Wheel & Foot-pedal Control
• Adjustment: Multi-position Quick-adjust steering column

Mower Deck

• Size/Type: 60" Fabricated Deck
• Material: 7ga. (.187”) steel shell
• Top Reinforcement: 7ga. (.187") top plate
• Bottom Reinforcement: 7ga. (.187") bottom plate
• Rolled Leading Edge: 1/4" (.250") steel
• Side Construction: 5/16" (.313) steel
• Cutting Height: 1" - 5"
• Blade-Tip Speed (Approx): 18,500 fpm
• Deck Blades: Triple-blade / High-lift blade (standard) Marbain Blade
• Trim-Side Wear Guard: 3/4" Thick UHMW-PE Replaceable
• Anti-Scalping: 2 Front HD w/ Bushings & Grease Zerk
• Spindle Covers: Steel - Tool-less Quick Release
• Discharge Chute: Heavy-duty Flex chute (impact resistant)
• Deck Height Adjustment: Foot pedal with spring assist (16 Positions)

General

• Rear Tires: 24" x 12" - 12" (Turf Tread)
• Front Tires: 13" x 6.5" - 6" (Turf Tread)
• Weight (approx): 1060 lbs
• Cup Holder: Integrated into Side Pod
• PTO Clutch: Warner Clutch - 125 ft lb
• ROPS: 2"x2" Foldable 3 Position Low Profile Clearance
• Park Brake / Braking: Hand-operated lever with integrated hydro pump release lever
• Rear Bumper: 5/16" Thick Steel rear engine guard with pre-drilled mounting points
• Seat Type: High-back dial suspension with EVC Cushion, seat belt, angle back adjust, arm rests
• Front Axle / Yokes: 2" x 3" solid axle tube and 1/2" thick steel front yokes
• Frame: Fully welded, full-length 3/8 x 5" laser cut steel with integrated tie-down slots
• Throttle/PTO/Key Switch: HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement PTO
• Cruise Control: N/A
• Length / Width / Height (discharge chute up width/ ROPS up height): 80" L x 50" W x 58" H
• Safety Systems: Operator presence
• Hour Meter: Standard electronic

Engine & Drive System

• Horsepower / CC's: 27 hp - 852 cc
• Engine Type: Kawasaki FX850v
• Ground Speed: Forward: 10 mph / Reverse: 5 mph
• Fuel Capacity: Twin 7.45 gal. tanks (14.9 gal. total) with dial gauge
• Transmission: Parker HTJ Series (12cc pump / 260cc wheel motor)

Description:

Features:

• 31 HP Kawasaki FX921v (999cc) engine and 14cc Parker HTG transmission
• 60” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
• 3-year limited commercial warranty (no hour limitations)

Description:

Features:

• 35 HP Kawasaki FX1000v (999cc) engine and 16cc Parker HTG transmission
• 72” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
• 3-year limited commercial warranty (no hour limitations)and 5 year / 1,750 hour limited deck construction warranty

Description:

Features:

• A 163cc Briggs and Stratton® engine is built to deliver the strength to power through your yard
• Designed to help you navigate uneven terrain with ease thanks to front-wheel drive with single lever drive control
• 11-in. high rear wheels designed for easy mobility over tough terrain
• 21-in. steel deck with deck wash and 3-in-1 bagging, side discharge and mulching capabilities

Specifications:

• Engine:
• Brand: Briggs & Stratton
• Model: 725exi
• Model Number: 104M02-0223
• Displacement: 163cc
• Starter: Recoil
• Fuel Tank Capacity: 1.0 quart
• Engine Oil Capacity: 15 ounces
• Choke: ReadyStart
• Drive System:
• Type: Front-wheel drive (FWD)
• Cutting Deck:
• Cutting Width: 21 inches
• Deck Wash: Yes
• Material: Steel
• Cutting Height Range: 1.25 inches to 3.75 inches
• Deck Positions: 6
• Height Adjustment: Dual-lever
• Cutting System:
• Type: Signature Cut
• Mulch Plug: Integrated
• Discharge Location: Side
• Controls:
• Handle: Adjustable
• Drive Controls: Single-lever
• Wheels:
• Front Wheels: 8 inches (Zag tread pattern)
• Rear Wheels: 11 inches (Zag tread pattern)
• Bearing Type: Poly Bushing
• Additional Specifications:
• Model Number: 12AVB2R3710
• Warranty:
• Residential: 3-year limited
• Engine: 3-year limited
• Commercial: No
• Commercial Engine: No
• Grass Collector:
• Capacity: 1.9 bushels
• Type: Dust Blocking

Description:

Features:

• A 190cc Briggs & Stratton® engine is built to deliver the strength to power through your yard
• Large 23-in. all-steel deck is designed to allow you to mow efficiently with 3-in-1 bagging, side discharge and mulching capabilities
• Rear-wheel drive provides strong control on uneven terrain
• 9-in. front and rear wheels with Cub Cadet® tread designed for excellent mobility
• MySpeed™ drive control system delivers six speeds of control, easy engagement and adjusts to your pace.

Specifications

Engine

• Brand: Briggs & Stratton
• Model: 875 Pro
• Model Number: 125P02-0070
• Displacement: 190cc
• Starter Type: Recoil
• Fuel Tank Capacity: 1.0 quart
• Oil Capacity: 20 ounces
• Choke: Readystart

Drive System

• Type: Rear-Wheel Drive (RWD)

Cutting Deck

• Cutting Width: 23 inches
• Material: Steel
• Deck Wash: Yes
• Height Range: 1.25" - 3.75"
• Positions: 6
• Height Adjustment: Single-Lever
• Cutting System: Signature Cut
• Mulch Plug: Integrated
• Discharge Location: Rear

Warranty

• General Warranty: 4-year limited
• Commercial Warranty: No

Controls

• Handle: Quick Adjust
• Drive Controls: Cub Cadet MySpeed

Wheels

• Tread Pattern: Aggressive
• Front Wheels: 9 inches
• Rear Wheels: 9 inches
• Bearing Type: Poly Bushing

Additional Specifications

• Model Number: 12ABR27B710

Grass Collector

• Capacity: 3.1 Bushels
• Type: Dust Blocking with Indicator

Description:

Features:

• 60 Volt Max*, 5.0Ah, 300Wh lithium-ion battery
• Mow up to ½ acre, or 50 minutes on a single charge, without power fade
• Premium ball bearings and 11” rear wheels increase traction and maneuverability
• Brushless motor for optimized performance and longevity
• 21-in all steel deck provides added durability with 3-in-1 side-discharge, bagging and mulching capabilities

Description:

Compact and powerful, the 1X 21 in. 208cc Gas Single-Stage Snow Blower with Remote Chute Control and Headlight can tackle up to 6 in.of snow†. A 13 in. intake height is designed to clear small driveways or sidewalks quickly. Quickly change the direction of snow discharge from the operator’s station with the dashboard-mounted control lever. Push button electric start is designed for reliable starting without the need to pull-start. An in-dash headlight helps provide visibility before dawn or after sundown.

• 21 in. clearing width and 13 in. intake height is capable of removing up to 6 in. of snow† and designed to throw snow up to 25 ft. away
• Skip the pull starts and get to work quickly with push-button electric start (Requires use of 15amp/125V outdoor-rated extension cord sold separately)
• In-dash LED headlight helps provide visibility in low-light conditions
• Snow Blower

Specification:

Engine:

• Engine Brand: Cub Cadet®
• Engine Model Number: 670-JUB
• Engine Displacement: 208 cc
• Fuel Tank Capacity: 2 quarts US / 1.9 L
• Engine Start: Recoil and Push-Button Electric
• Governor: Mechanical
• Fuel Delivery: Carburetor

Drive System:

• Drive Type: Auger-Assist

Controls:

• Handle Grip(s): Padded Gullwing
• Chute Rotation Control: Remote Single-Lever
• Chute Pitch Control: Remote Single-Lever
• Chute Rotation: 190°
• Single-Hand Operation: Not Applicable
• Steering Control: Not Applicable

Power and Performance:

• Clearing Width: 21 inches
• Intake Height: 13 inches
• Number of Stages: One

Dimensions:

• Auger Diameter: 9 inches
• Impeller Diameter: Not Applicable
• Accelerator Diameter: Not Applicable
• Tire Size: 7" x 2"
• Tread: Zag

Additional Specifications:

• Headlight(s): In-dash LED
• Shave Plate: Polymer
• Skid Shoes: Not Applicable
• Drift Cutters: No
• Auger Material: Reinforced Rubber
• Chute Material: High-impact Polymer

Model Number:

• 31PM2T6C710

Warranty:

• Residential Warranty: 3-year limited
• Commercial Warranty: 1-year limited
• Chute Warranty: 3-year limited
• Auger Gearbox Warranty: Not Applicable

Disclaimers:

• Specifications: Subject to change without notice and without incurring obligation. Actual products may vary in design, required attachments, safety features, and non-functional appearance from those depicted in advertisements.
• Snow Removal: Results may vary depending on weather and snow conditions.

Description:

Features:

• A 173cc commercial-grade Kohler® engine is built to provides reliable power, easy starting, long use and minimal noise.
• 22" cutting swath designed to provide a wide reach to quickly trim large areas of grass.
• Handle adjusts to 3 positions and a rubber bail grip is built to provide mooth handling and comfort, folds for easy storage.
• Lower the cutting height to take on walls and structures or raise it to tackle thick grass and weeds with a 2.375" to 4.375" range
• Offset deck designed to easily trim around obstacles such as corners and fence lines while walking in a straight line

Description

The Cub Cadet Ultima Series

The ultimate mowing experience: enhan

ced strength and durability, redefined comfort, uncompromised performance and a best cut in its class. Ideal for yard sizes up to 5 acres. Forged with Strength – Our continuous square tubular frame was designed for enhanced strength and durability. Redefined Comfort – Settle in to a fully adjustable command center and experience next-level comfort designed for optimized speed and control from head to toe. Best-in-Class Cut™ – The Aeroforce™ deck has been independently tested against the top competitors and proven to deliver the best cut in its class. Step up to the Cub Cadet Ultima Series.

Introducing The Ultima Series™ ZTX5 60. The professional-grade build of the Ultima Series™ ZTX5 60 zero turns deliver enhanced strength and durability so you can comfortably cut at maximum speed through the most challenging conditions.

Features

Key Features

• 24hp Kawasaki® V-Twin OHV Engine
• Dual Hydro-Gear™ ZT 3200 transmissions for more power & stability
• 152cm (60”) heavy-duty fabricated steel cutting deck
• Electric fingertip engagement to easily engage and disengage the deck
• Premium automotive class high-back seat with padded armrests
• LED headlights
• Foldable ROPS
• Rubber anti-vibration footrest
• Ergonomic control
• Easy dial deck & height adjustment

Strength On Deck

• Built on a 4cm x 8cm tubular frame and featuring a 10-gauge steel fabricated AeroForce️ Max™ deck with side, top and leading-edge reinforcements and best-in-class bagging capabilities, you will be equipped with the right amount of strength and rigidity for consistent productive mowing.

Built-In Longevity

• The professional-grade Kawasaki® engines are backed by a strong 3-year domestic warranty and service support from our extensive dealer network nationwide to assure the extended lifetime of your machine.

Command With Comfort

• Advanced polymer seat isolators, isolated front caster suspension and an automotive class high-back seat with padded armrests deliver a smooth, quiet ride at up to 14km/h with less vibration than other zero turns.

Endless Versatility

• With a full line-up of premium attachments and LED headlights, as well as a standard rollover protection system (ROPS) plus rear tow hitch, build the perfect zero turn package to tackle all of your needs.
• 
  

Accessories & Attachments

• Mulching Kit (optional)
• Triple Bagger Catcher (optional)

Warranty

Fabricated deck shell – 5 year warranty. Unit – 3 year unit domestic warranty. 1 year unit commercial warranty. Engine – 2 year engine domestic warranty. 2 year engine commercial warranty.

Description:

KEY FEATURES

• Synchro-Steer™ technology offers 4-wheel control helps and provides stability for straight-line mowing on hillsides and slopes up to 20°
• A 24 HP* Kohler KT-Pro 7000 Series V-twin OHV engine delivers high-performance power and exceptionally smooth, quiet operation
• Commercial grade dual hydrostatic rear-wheel transmissions for quick and easy mowing up to 8 MPH forward (3.5 MPH reverse) zero-turn controlled ground speeds, that quickly leaves your lawn with a professional-quality finish

FEATURES

• Excellent Stability On Hills: Synchro-Steer™ technology delivers four-wheel control, providing straight-line mowing on hillsides and slopes up to 20-degrees
• Premium Cut: AeroForce™ Max reinforced fabricated steel cutting decks designed to deliver high quality results and mow a wide area of grass to help minimize cutting time.
• Strong, Durable Frame: A strong, continuous 1.5 in. x 3 in. tubular steel frame with a triple guard corrosion defense system helps protect against wear and tear
• Turf Master Tires: Turf Master® tires designed to help minimize turfing and provide traction and stability on hills.
• Ride In Comfort: SoftTouch steering wheel and an adjustable steering column that tilts for easy steering and great handling on hills and uneven terrain.
• Customize Your Machine: Unlock the full potential of your Ultima ZTXS with a variety of attachments and accessories (sold separately).
• Easy Maintenance: An open frame design and hinged/removable floor pan allow easy access to the deck and engine for easy maintenance
• Strong Warranty: 4-year/800-hour limited product warranty, lifetime limited frame and fabricated deck shell warranty for the ultimate peace of mind

SPECIFICATION:

ENGINE

• Engine Brand: Kohler®
• Engine Model: Pro 7000 series
• Engine Model Number: KT735
• Engine Displacement: 725cc
• Engine Output: 24HP
• Starter Type: Electric
• Fuel Tank Capacity: 5.5 gal. US (20.82 L)
• Cylinders: Twin
• Engine Start: Ignition Key
• Engine Oil Capacity: 2.0 qt. US (1.89 L)
• Lubrication: Fully pressurized
• Charging System: 12 amp regulated
• Fuel Gauge: Yes
• Governor: Mechanical
• Choke: Choke-a-matic
• Air Filter: Dual element
• Oil Filter: Yes
• Fuel Delivery: Carburetor

BATTERY

• Battery: 210 CCA
• Battery Type: AGM (Absorbent Glass Mat)
• Battery Voltage: 12V

DRIVE SYSTEM

• Transmission: Hydro-Gear ZT 3100
• Forward Speed: 8 MPH /12.9 km/h
• Reverse Speed: 3.5 MPH / 5.6 km/h
• Drive System: Hydrostatic

CUTTING DECK

• Deck Cutting Width: 54 in
• Deck Wash: No
• Deck Material: 10-gauge steel with 2-gauge reinforcement
• Deck Engagement (PTO): Electric
• Deck Construction: Fabricated
• Blade(s): Three
• Deck Lift: Foot pedal with Dial Adjust
• Cutting Height Range: 1" - 4.75"
• Anti-Scalping: Three gauge wheels
• Deck Positions: 17

WARRANTY

• Warranty: 4-year 800 hours
• Frame Warranty: Lifetime Limited
• Deck Shell Warranty: Lifetime limited
• Commercial Warranty: 4-year 800 hours

CHASSIS

• Frame: 1.5" x 3" tubular steel
• Turning Radius: 0°
• ROPS: Yes
• Rear Tow Hitch: Yes
• Corrosion Protection: Yes

CONTROLS

• Cruise Control: No
• Brakes: Disc
• Steering Control: Steering Wheel

COMFORT

• Seat Type: 20" high back
• Armrests: Yes
• Seat Adjustment: Lever

WHEELS

• Rear Tires: 22"x 12"-12"
• Front Tires: 13"x 6.5"-6"
• Tire Tread: Turf Master / Multi Trac

ADDITIONAL SPECIFICATIONS

• Hour Meter: Yes
• Mulch Kit: Available separately
• Headlight(s): Dual-LED
• Cup Holder: Yes
• Operator Presence System: Yes
• Parking Brake: Foot Controlled
• Model Number: 47RSCAB7010

SPECIFICATIONS

• Series: Ultima Series™ ZTXS

Description:

Cub Cadet® Enduro Series XT1 ST54 54-in. 24 HP* Riding Lawn Mower with AeroForce™ Fabricated Deck is designed to deliver a premium cut with few clumps and stragglers, fine clippings and evenness. Features a hydrostatic transmission that helps provide a smooth operation. An adjustable cut and sew high back 15-in. seat designed to provide comfort for an excellent mowing experience.

Features:

• A 24 HP/725cc twin-cylinder Kohler® engine is designed to deliver reliable power to tackle your yard.
• 54-in. strong AeroForce™ fabricated deck is designed to deliver a premium cut with few clumps and stragglers, fine clippings and evenness.
• Hydrostatic transmission helps provide smooth operation, no shifting, just push the pedal and go.
• Adjustable cut and sew high back 15-in. seat with a 10-degree incline and slide slope designed to provide comfort for an excellent mowing experience.
• Compact AGM battery is designed to deliver a premium experience with a long lifespan, low maintenance and excellent starting performance for reliable starting season to season.
• Lawn Tractor

Specification:

Engine:

• Brand: Kohler®
• Model: 7000 Series
• Model Number: KT735
• Displacement: 725cc
• Output: 24HP
• Starter Type: Electric
• Fuel Tank Capacity: 3.0 gal. US (11.36 L)
• Cylinders: Twin
• Start Method: Ignition Key
• Oil Capacity: 2.0 qt. US (1.89 L)
• Lubrication: Fully pressurized
• Charging System: 12 amp regulated
• Fuel Gauge: No
• Governor: Mechanical
• Choke: Separate Choke
• Air Filter: Dual element
• Oil Filter: Yes
• Fuel Delivery: Carburetor

Battery:

• Type: AGM (Absorbent Glass Mat)
• Voltage: 12V
• Capacity: 210 CCA

Drive System:

• Transmission: Tuff Torq® K46
• Type: Hydrostatic
• Forward Speed: 5.5 MPH / 8.6 km/h
• Reverse Speed: 3 MPH / 4.8 km/h
• Rear Axle: 3/4"
• Transmission Control: Foot Pedal
• Transmission Housing: Aluminum
• Rear Differential Lock: No

Cutting Deck:

• Deck Cutting Width: 54 in
• Deck Wash: Yes
• Deck Material: 11-gauge steel
• Deck Engagement (PTO): Electric
• Deck Construction: Fabricated
• Blade(s): Three
• Deck Lift: Manual
• Cutting Height Range: 1" - 4"
• Anti-Scalping: Four gauge wheels plus roller
• Deck Positions: 12

Chassis:

• Frame: Robotically welded
• Turning Radius: 16"
• Bumper: Steel tube
• Rear Tow Hitch: Yes
• Corrosion Protection: Yes
• Front Pivot Bar: Cast iron

Controls:

• Cruise Control: Yes
• Brakes: Disc

Comfort:

• Seat Type: 15" high-back
• Armrests: No
• Seat Adjustment: Lever
• Floor Mats: Rubber
• Wheels Bearing Type: Poly Bushing
• Rear Tires: 22"x 9.5"-12"
• Front Tires: 16"x 6.5"-8"
• Tire Tread: Turf Saver

Description:

The Cub Cadet® Enduro Series XT1 LT46 46-in. 22 HP* Riding Lawn Mower features a 46-in., stamped deck. Features a hydrostatic transmission that helps provide a smooth operation. An adjustable cut and sew high back 15-in. seat designed to provide comfort for an excellent mowing experience.

Features:

• A 22 HP/725cc twin-cylinder Kohler® engine is designed to deliver reliable power to tackle your yard.
• 46-in. stamped deck built with strong materials and an exceptional belt design while delivering a premium cut.
• Hydrostatic transmission helps provide smooth operation, no shifting, just push the pedal and go.
• Lawn Tractor

Specifications:

Engine

• Brand: Kohler®
• Model: 7000 Series
• Model Number: KT725
• Displacement: 725cc
• Output: 22 HP
• Starter Type: Electric
• Fuel Tank Capacity: 3.0 gal. US (11.36 L)
• Cylinders: Twin
• Engine Start: Ignition Key
• Oil Capacity: 2.0 qts. US (1.89 L)
• Lubrication: Fully pressurized
• Charging System: 12 amp regulated
• Fuel Gauge: No
• Governor: Mechanical
• Choke: Separate Choke
• Air Filter: Dual element
• Oil Filter: Yes
• Fuel Delivery: Carburetor

Battery

• Battery: 210 CCA
• Type: AGM (Absorbent Glass Mat)
• Voltage: 12V

Drive System

• Transmission: Tuff Torq® TL-200
• Forward Speed: 5.5 MPH / 8.6 km/h
• Reverse Speed: 3 MPH / 4.8 km/h
• Rear Axle: 3/4"
• Drive System: Hydrostatic
• Transmission Control: Foot Pedal
• Transmission Housing: Aluminum
• Rear Differential Lock: No

Cutting Deck

• Cutting Width: 46 in
• Deck Wash: Yes
• Material: 12-gauge steel
• Engagement (PTO): Manual
• Construction: Stamped
• Blades: Two
• Lift: Manual
• Cutting Height Range: 1" - 4"
• Anti-Scalping: Four gauge wheels
• Positions: 12

Chassis

• Frame: Robotically welded
• Turning Radius: 16"
• Bumper: No
• Rear Tow Hitch: Yes
• Corrosion Protection: Yes
• Front Pivot Bar: Cast iron

Controls & Comfort

• Cruise Control: Yes
• Brakes: Disc
• Seat Type: 15" high-back
• Armrests: No
• Seat Adjustment: Lever
• Floor Mats: Rubber

Wheels

• Bearing Type: Poly Bushing
• Rear Tires: 20"x 8"-8"
• Front Tires: 15"x 6"-6"
• Tire Tread: Turf Saver